PRO1/PRO3/PRO5 Commerical Treadmill Troubleshooting
This treadmill is designed and manufactured to be reliable and easy to use. However, if you have a problem, these troubleshooting steps may help you find the cause.
Problem: The console is erratic or not lighting up.
Solution: Check to make sure the treadmill is properly plugged in, turn the power switch off and back on again and make sure the safety key is in place. Check all wire harness connections to be sure they are all properly connected. If the problem persists contact LifeSpan Customer Support.
Problem: The belt does not stay in the center of the treadmill when in use.
Solution: First check to make sure the treadmill is level, then refer to the instruction in this equipments owner's manual on how to tension and adjust the belt.
Problem: The treadmill motor seems strained or the fuse is blown.
Solution: The lubricating silicone that is applied to the deck and belt is wearing down and the belt needs to be lubricated with silicone spray.
Problem: The treadmill belt slips during use.
Solution: The belt may need to be tensioned after a period of use. Refer to the Belt Tensioning and Adjustment Section in your equipments owner's manual.
Problem: Heart Rate is erratic or not picking up.
Solution: Make sure your hands are moist. Make sure all connectors at the back of the console are properly connected and no wires are damaged. If wearing a chest strap make sure the batteries are good and that the electrodes are moist and positioned properly on your chest.