• Cart
  • (0)

FREE Shipping on all Orders | 60-Day Satisfaction Guaranteed

 

TR800-DT3/TR1200-DT3 Treadmill Desk Troubleshooting

 

 

These treadmill desks are designed and manufactured to be reliable and easy to use. However, if you have a problem, these troubleshooting steps may help you find the cause.

 

 

Problem: The console is erratic or not lighting up.

Solution: Check to make sure the treadmill is properly plugged in, turn the power switch off and back on again and make sure the safety key is in place. Check all wire harness connections to be sure they are all properly connected. If the problem persists contact LifeSpan Customer Support.

 

Problem: The belt does not stay in the center of the treadmill when in use.

Solution: First check to make sure the treadmill is level, then refer to the instruction in this equipments owner's manual on how to tension and adjust the belt.

 

Problem: The treadmill motor seems strained or E1 comes up after several minutes of use.

Solution: The lubricating silicone that is applied to the deck and belt is wearing down and the belt needs to be lubricated with silicone spray.

 

Problem: The treadmill belt slips during use.

Solution: The belt may need to be tensioned after a period of use. Refer to the Belt Tensioning and Adjustment Section in your equipments owner's manual.

 

Problem: The treadmill speed doesn't feel right (too fast or too slow).

Solution: The treadmill is set up in Metric Mode. To change between English and Metric Mode press the down arrow until F014 shows in the display. Press enter and EN or SI will show up in the display. To change to EN press the down arrow button. To change to SI press the up arrow button. Press enter and remove and reinstall the safety key.

 

Problem: Treadmill automatically pauses during workout.

Solution: Treadmill is not picking up Step Count. To turn Intelli-Guard off press the down button until F012 appears in the display. Press enter and on or off will show up in the display. Press the down arrow button to turn the Intelli-Guard off. Press enter and remove and reinstall the safety key. (Note: For Engineering Mode information see the owner’s manual for the DT3)

 

Problem: Uart shows in diplay.

Solution: Turn treadmill power switch off. Unplug and replug the connections made in step 2D and 3D of assembly. Turn the treadmill power back on and check to see if it functions.

 

Problem: dc-6 shows in display.

Solution: Turn treadmill power switch off. Unplug and replug the connections made in step 2D and 3D of assembly. Turn the treadmill power back on and check to see if it functions.

 

Problem: Console not connecting to personal computer via Bluetooth.

Solution: Log into your LifeSpan Fitness Club account. Go to the Frequently Asked Questions link located at the bottom of your home page. If further assistance is needed please email coordinator@lifespanfitness.com

Please wait...