Treadmill Desk and Bike Desk Personal Settings

March 17, 2016

Want to customize your LifeSpan treadmill desk or bike desk? Follow the directions below for your treadmill desk setup and to activate personal settings. These instructions apply to the 2016 or later models: TR800-DT5, TR1200-DT5, TR1200-DT7, TR5000-DT5, TR5000-DT7, C3-DT5 and C3-DT7 exercise desks.

Press and hold Change Display for one second to go to Settings mode.

Note: the console must be in idle mode to enter personal settings; idle mode shows the time of day in the display. To get to idle mode from Pause, press and hold Stop/Reset for one second.



Display Shows

Choice 1 (default)

Choice 2

Clock Set CK n/a n/a
Intelli-Guard — stops the walking belt if you don’t walk on it for 20 seconds. Guard ON OFF
Reset Speed — normally the treadmill always starts at 0.4 mph. If you change this setting to OFF, the treadmill will start at the previous walking speed. RESET OFF ON
Beep — you can turn the safety beep off. BEEP ON OFF
Maximum Speed — the maximum operating speed of the treadmill in mph. L 2.0 4.0
Pre-Set Speed Function — enables or disables this function; if OFF, the Pre-Set key does nothing.SET ON OFF
Pre-Set Speed — sets the speed of the Pre-Set function. SP 1.5 n/a
User Weight — the default weight, which is used to calculate estimated calories. T 150 n/a
Units of Measure — Imperial or Metric U ENGL M
Automatic Bluetooth Syncing — instead of having to press the Bluetooth key, the console will sync with the app any time your phone is within an inch of the console — just like your favorite activity tracker. BT-A OFF ON
Multi-User if you are using a treadmill desk where there are other treadmill desks, a co-worker might wander over to you and accidentally sync your data onto their phone if you are using Automatic Bluetooth Syncing. If you turn Multi-User ON, it automatically disables Automatic Bluetooth Syncing. USER NO YES