Keep your treadmill in optimal condition using LifeSpan's 100% silicone spray treadmill lubricant. Proper lubrication on the underside of the treadmill belt is required to reduce heat and friction, prolonging the life of the motor, electronics, belt and deck. LifeSpan's treadmill lubricant spray contains no harmful solvents and is colorless, odorless, non-toxic and nonflammable. This 4-ounce bottle of lubricant for treadmills is good for four applications or one year of normal treadmill maintenance.
1. Remove the motor hood by loosening the four screws – Note: the screws only need to be loosened and not fully removed.
2. Slide your hand down the underside of the belt towards the center, then lift the belt away from the deck.
3. Aim the nozzle of the spray bottle towards the center and apply about a dozen sprays of lubricant to each side. Repeat this process 2 more times.
4. Once the belt is lubricated, replace the motor hood, plug the power cord in, power on the treadmill and walk for a few minutes to allow the lube to coat the treadmill belt and deck.